Microphones : Boundary Microphones : Audio-Technica U.S., Inc. - ES945O/FM3

Omnidirectional condenser boundary microphone with self- contained power module, RGB LED ring (7 selectable colors + OFF)indicates mute status, phantom power only, for table or panel mount applications, 3-pin, black

Model: ES945O/FM3

Designed for surface-mount applications such as conferencing, recording, monitoring and other demanding sound pickup applications
Capacitive touch switch enables local muting of the microphone
Highly visible two-state RGB LED ring (7 selectable colors + OFF) indicates mute status
Low-profile element provides uniform omnidirectional polar pattern with 360° acceptance angle
Mounts unobtrusively in tabletops and panels

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Omnidirectional Condenser Boundary Microphone with 3-Pin XLR Output and Local Muting. This phantom-powered omnidirectional condenser boundary microphone features a 3-pin XLR output connector with a capacitive touch switch that enables local muting of the microphone.

Designed for surface-mount applications such as conferencing, recording, monitoring and other demanding sound pickup applications
Capacitive touch switch enables local muting of the microphone
Highly visible two-state RGB LED ring (7 selectable colors + OFF) indicates mute status
Low-profile element provides uniform omnidirectional polar pattern with 360° acceptance angle
Mounts unobtrusively in tabletops and panels
Self-contained power module with 3-pin XLR output connector
Rugged all-metal case with a two-layer steel mesh grille
Rubber Isolators provide mechanical dampening of mounting-surface vibration
Requires 11V to 52V DC phantom power
UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
RoHS compliant—free from all substances specified in the EU directive on hazardous substances

Microphone Type - Dynamic
Polar/Pickup Pattern - Omnidirectional

Maximum Frequency Response (Bandwidth): 15000 Hz
Maximum Frequency Response (Bandwidth): 15 kHz
Minimum Frequency Response (Bandwidth): 60 Hz
Minimum Frequency Response (Bandwidth): 0.06 kHz
Dynamic Range: 109 dB
Impedance: 60 ohm
Maximum SPL (Sound Pressure Level): 130 dB
Sensitivity: -33 dB
Signal to Noise Ratio: 73 dB
Current Draw: 0.01 Amps
DC Voltage: 52 Volts
Depth: 1.89 in
Height: 3.34 in
Width: 1.50 in
Product Weight: 0.13 lbs

Boundary microphone 1050269 kb - Other

Project List

Suggested Products

Full-range Half-cardioid Condenser Boundary Microphone with XLR Connector, White

by Electro-Voice

Installed boundary layer microphone (cardioid, pre-polarized condenser) (White)

by Sennheiser

Wireless Table Boundary Microphone with Half-caridioid Pickup Pattern

by Sennheiser